My friend (and amazing artist and builder) Paul Lee was inspired by the Lowell Sphere to build a Mickey Mouse back in 2011. I’ve always liked how it turned out and wanted to make my own. It ended up taking on a life of its own and has resulted in six different Disney character builds (so far); this is the first of them.
Los Angeles City Hall
1:200 Scale LEGO Model by Bruce Lowell
Quick links for this page: Image Gallery
History of and Information about City Hall | Why Build City Hall?
History of the Build | Researching the Build | Attention to Detail
Image Gallery
History of and Information about City Hall
Los Angeles City Hall has a rich history. Much ink has been spilled over it, so I only want to highlight a few key facts:
∙ Measures 453 ft tall, with a base of 476 ft by 250 ft
∙ Mayor George E. Cryer comissioned lead architect John Parkinson to design the building in 1925
∙ Building completed and dedicated on April 26th, 1928
∙ Tallest building in Los Angeles until 1968
∙ The top of the tower is modeled after the Mausoleum at Halicarnassus, one of the 7 wonders of the ancient world
Why Build City Hall?
I’m a native Angeleno and as such I’ve been saturated in the architectural culture and history of Los Angeles for my entire life. As a LEGO builder, I think there’s an inherent appreciation of and affinity for architectural design.
I remember taking family trips down to Disneyland in Aneheim in my youth, and later LEGOLAND in Carlsbad in my adolescence, and more often than not we would drive through the 101 Freeway. (Yes, we call it “the 101“, not “101”.) City Hall was a prominent feature of the skyline during these drives, and something I always looked forward to seeing, even before I knew what it was, or that I would someday attempt to build it out of LEGO bricks.
History of the Build
Version 1
My first research images and saved CAD files date back to December 2014. My first version was about half the size of the final one, with the seed parts being the headlight bricks for the windows and the fences for the columns. It would have made for a very manageable size, but I wasn’t able to get the amount of detail I wanted, especially in the top of the tower and columns.
Version 2
Sometime in the spring of 2015 I built the top of the tower of an updated version. The seed part that motivated the build (and determined the scale) was theWhite 33291 Plate, Round 1 x 1 with Flower Edge (4 Knobs / Petals) as the capitals of the columns. I built down to about the 30th floor.
After calculating the sheer amount of White 3005 Brick (about 600) and 3024 Tr. Black Plate I’d need for the build (about 5000) I knew this wasn’t going to materialize overnight. At some point I placed an order with LEGO for the majority of the bulk brick I needed and completely forgot about the order and the build until they arrived in November 2016.
Having the majority of the parts in-hand motivated me to convert my built model into CAD. From there I was able to confirm the scale of what was built, expand it and complete the blueprint for the entire building. From December 2016 to January 2017, I constructed most of main building tower, the north and south wings, and the front of the surrounding base.
BricksLA 2017
I decided to display the building at BricksLA 2017, which is held annually in Pasadena during the month of January. This pushed me to complete enough of the build to display it. I made a very basic grass base for the building. The east (“back”) wall was literally a wall (no windows, doors, or detail). There was no roof detail for the base, no foliage aside from eight palm trees flanking either side of the main entrance. I was happy enough with the build but I knew I wanted to keep at it.
Version 3
I had to put the build on hold for about a year; a new home, new baby, new job opportunities will do that! The build did not survive the year, which was a blessing in disguise. It forced me to rebuild AND rethink a lot of the techniques I used. New LEGO elements introduced since the initial build really helped me to get the build more accurate and more solid, while still appearing almost exactly the same on the outside.
By June 2018 I had the building completed. At this point I could advance my previous plans of building out the entire city block that Los Angeles City Hall is located within. I scaled the block to the building in CAD, and over the next five months took my time to build the base, add in Grand Park, work on the foliage and placement, and elevate the streets (the northwest corner is the highest point; the southeast corner the lowest).
Having about two months between “completion” and BricksLA 2019, and having recently finished a commission that required lighting, I decided to see what kind of lighting I could add to City Hall. I was able to get lighting behind the columns as well as the aircraft warning light on top. I do plan to add more lighting inside the building proper, as well as the spotlights on the walkways around the base.
BricksLA 2019
I was very happy to be able to display the completed build at BricksLA 2019, including the full city block, Grand Park, sidewalks and palm trees, and all the other details I poured so much time into getting right. It was the first LEGO creation attendees would see when walking down the stairs to the display area.
I was honored that the build was recognized by my fellow convention attendees as a “MOC of Note.” I even got to take home what I think is a cool trophy, one of three (that I built) for the “MOC of Note” category; I didn’t expect to take one back home with me!
I really had a fun time interacting with the public. It was cool seeing people recognize the building, point out details that they knew about, or just appreciate it as a build without being familiar with it.
Researching the Build
As long as I’ve been driving, I’ve frequently made pit stops while in downtown LA to take a quick drive around City Hall, admiring its grandeur from the comfort of a vehicle. I’ve also enjoyed researching old postcards and photos of City Hall, especially from the era in which it was constructed.
In December 2016, once I had started working on the CAD model of the full building, I took my family to downtown to walk around City Hall and take some detailed pictures. While walking by the main entrance we saw that it was open to the public (something I’d never considered) so we decided to take a self-guided tour. Say what you will about government employees, but every single one we ran into during our visit, from the police officers checking us in, to the office folks taking the same elevators as us, was exceptionally friendly and welcoming. It was a pleasant surprise and a wonderful experience I won’t soon forget.
Since our initial tour, focusing on the exterior details of the building, I’ve made several more field trips to City Hall, to focus on the street detail, landscaping and topography, foliage placement, etc. It’s been a really fun experience seeing City Hall in a new way and with a new focus each time.
Attention to Detail
Changing the dynamic of my research from Google searches to site visits was immensely helpful, especially as I moved from strictly architecture to the street level details. Some of the many things I paid attention to, which you can also see in detail in the Image Gallery, include:
- sidewalk palm trees
- trees in Grand Park
- overall elevation
- air raid alarm
- bus stops
- fire hydrants
- POW-MIA flag I designed and had printed by EclipseGrafx
Click here to see Los Angeles City Hall on Google Maps!
Press inquiries? Members of the media are encouraged to contact Bruce at bruce@brucelowell.com.
Banana Stand
“There’s always money in the Banana Stand!“
Since I posted my original Banana Stand in 2015, I’ve received many requests for instructions, sets, stickers, etc. Since then I’ve been able to refine the design and, more importantly, have some professionally printed and die-cut stickers made up for the MOC. I heard the calls for making this available loud and clear. I wanted this to be a special kit; my first publicly available kit that incorporated full color PDF instructions, custom figures, high quality stickers, all in a fun build and a nice package!
CLICK HERE or on one of the pictures to pre-order your Banana Stand today over at my Web Store!
- Pre-orders will start March 14th 2019
- All pre-orders will also receive a “Banana Man” mini-figure!
- Kits are expected to ship on Cinco de Cuatro, May 4th 2019
Bananas
Donut Shop
This was a collaborative build with David Costa. It was a lot of fun working with him, and the best thing about it is that instructions are available. Click the link below:
Mac Tonight
Mac Tonight; the coolest fast food mascot of the 1980’s. I planned this as a minifig(ish) scale model, but after seeing my Arrested Development Frozen Banana Stand I saw an opportunity to double the top of the banana to attempt a crescent moon shape. I’m glad I got to get another cool MOC out of the shaping! 🙂
BricksLA 2019 MOC of Note Trophy
Following up on the trophies I made for BricksLA 2018, I also built three of these “MOC of Note” trophies for BricksLA 2019, which was held in Pasadena, CA earlier this month. It was a perfect followup to my LEGO “sports” trophy, and maintained the theme from 2018.
The funny thing is, I actually won one of these trophies for my Los Angeles City Hall MOC that I (re)debuted at the show!
BricksLA 2018 MOC of Note Trophy
I built three of these “MOC of Note” trophies for BricksLA 2018, which is held annually in Pasadena, CA in the month of January. It was a perfect opportunity to build a LEGO “sports” trophy; I’ve had some pictures saved in my ideas folder for about 5 years so I’m glad I was able to follow through on it.
I also built MOC of Note trophies for BricksLA 2017 but I don’t think I have any pictures saved unfortunately.
Boba Fett Bust
I started this bust of Boba Fett, based off the Lowell Sphere, maybe 5 years ago, and kept it as a WIP in my bin of sand green plates. It wasn’t until just yesterday, when I purchased the Brickheadz Boba Fett and was able to use a good amount of the pieces to finish this model to my satisfaction. I’m REALLY happy with it! 🙂
Proto Man
Proto Man is the older “brother” of the titular character of the Mega Man video game series. I’ve always thought he was awesome with his shades, yellow scarf, and general aloofness. I’ve been wanting to create a large version of Proto Man for a while, and drew inspiration from Mike Nieves’ Proto Man and MOKO’s Masked Rider. I hope I honored their builds with this one.
Proto Man stands over 14″ tall.